Most residential frameless shower doors we install fall between $1,500 and $3,500, installed. A straightforward swing or pivot door-and-panel enclosure generally falls toward the lower end, while a more customized enclosure, such as a steam shower with low-iron glass, can fall toward the higher end or beyond it.
That range includes the work needed to get a finished enclosure into your bathroom. At ShowerDoorKing, our price includes measurement, fabrication, delivery, installation, standard clear tempered glass, high-quality hardware, and warranty coverage. Glass and hardware upgrades are listed separately as optional additions.
The price comes down to how much glass the shower needs, which glass and hardware you choose, how the enclosure is configured, and what it takes to install it correctly. Of those, the glass and hardware selections move the number more than the shape of the shower does.
How the enclosure type affects the price
A small door and a large corner enclosure are different projects, even if both are described as “frameless shower doors.” This is how the common layouts compare.
| Enclosure type | Typical installed range | What moves it within that range |
|---|---|---|
| Single swing or pivot door | $1,200 to $2,000 | Door size, hardware system, and mounting conditions. |
| Door and fixed panel | $1,300 to $2,300 | The most common layout. Panel width and glass selection do most of the work. |
| In-line panel / door / panel | $1,700 to $2,700 | Extra glass, panel supports, and where the door is hinged within the opening. |
| Neo-angle enclosure | $1,900 to $2,900 | Multiple sections meeting at angles, each with its own measurement and hardware. |
| 90-degree corner enclosure | $2,000 to $3,500 | Glass on two sides, the corner connection, and support for the return panel. |
| Sliding enclosure | $1,500 to $3,000 | Driven mostly by the sliding system itself, then the opening width and panel count. |
| Steam enclosure with transom | $1,500 to $3,500 | Taller glass, additional pieces and seals, and more detailed fitting around the opening. |
Read these as examples, not as a price list. The ranges overlap heavily on purpose, because the layout is only one of the things setting the price. A straightforward door and fixed panel specified with low-iron glass and an upgraded hardware system can easily cost more than a 90-degree corner enclosure built with standard clear glass and standard hardware. The shape of your shower tells you less about the price than the glass and hardware you put into it.
That is also why a slider should be compared by its actual system rather than by the word "slider." Two sliding enclosures of the same width can sit at opposite ends of the range above depending on which system is specified.
If you are still choosing a layout, our guide to types of frameless shower enclosures explains where each configuration works best.
The details that move your quote
Total square footage
Width and height both count. Taking the glass higher increases the amount of material, but it can also change the support and handling the enclosure needs. A taller enclosure is not always the best use of the budget, particularly if the extra height serves no purpose in the room.
Glass selection
Standard clear tempered glass is included in our base price and works well in many bathrooms. It has a natural green tint that is most noticeable at the edges and against light finishes.
Low-iron glass reduces that tint. In a bathroom with carefully selected marble, light stone, or detailed tile, we think it is an upgrade worth considering. You have already invested in those materials; the glass should let you see them clearly.
OptiShower OW combines low-iron glass with an anti-corrosion coating. HydroClear protected glass is another popular upgrade, especially for customers dealing with water spots and buildup. Glass clarity and surface protection solve different problems, so we explain the options before you choose.
Glass thickness
We commonly use 3/8-inch glass for frameless enclosures. Other thicknesses may be appropriate for a particular system or design, but thicker is not automatically better for every shower. Thickness affects weight, hardware requirements, and cost. The enclosure should be specified as a complete system.
Hardware and finish
Hinges, handles, clips, channels, and sliding components all contribute to the price. Changing the finish may change the cost, and changing the hardware system can have a larger effect still.
A simple handle substitution is different from redesigning an enclosure around a different hinge or sliding system. We list selected upgrades so you can see what each choice adds.
Custom shapes and installation conditions
A panel fitted around a bench or knee wall requires different fabrication from a simple rectangle. Angled walls, unusual openings, and access to the bathroom can also affect the work.
Even the route into the house matters. A large piece of glass needs to reach the bathroom intact, including through doorways and around stair turns. These are details we want resolved before the glass is made.
How much is glass, and how much is labor?
Our shower enclosures are quoted as complete installed projects. We do not use one universal percentage to divide every job into “glass” and “labor.”
The work includes more than the time spent attaching the door. There is field measurement, drawing preparation, fabrication coordination, inspection, delivery, installation, and responsibility for the finished enclosure.
That is also why an online labor estimate for installing a boxed shower door is not a direct comparison with a custom frameless enclosure. Before comparing prices, make sure the quotes describe the same glass, hardware, scope, and installation service.
What is included in a ShowerDoorKing quote?
Our standard shower enclosure price includes:
- Field measurement.
- Final shop drawings for your approval.
- Fabrication of the specified standard clear tempered glass.
- High-quality hardware for the quoted configuration.
- Delivery and installation.
- Warranty coverage, with terms provided for your project.
We also typically include removal and disposal of an existing shower enclosure at no additional charge. Tell us about the existing unit when requesting your quote so we can account for the replacement work.
Optional glass and hardware upgrades are shown separately. You can consider them without wondering whether a basic part of the installation has been left out of the price.
When is payment due?
Our deposit is typically 40%, due after you approve the final shop drawings. That deposit moves the glass into production.
The remaining balance, plus any selected glass or hardware upgrades, is collected when installation is complete. Your project paperwork sets out the amounts and selections, so those decisions are settled before production begins.
Why does frameless usually cost more than a basic framed door?
A frameless enclosure typically uses heavier glass and hardware designed to support it without a metal frame around every edge. Custom fabrication also means making the glass for your finished opening, including the correct dimensions and hardware cutouts.
A standard framed unit can make sense when keeping the initial cost down is the main priority and the opening suits the product. Our focus is custom shower glass, rather than builder-grade framed replacements.
“Framed” does not always mean inexpensive, either. A handcrafted architectural enclosure, such as the GlassCrafters Regal Series, belongs in a different category from a basic framed shower door. Its metalwork is a major part of the design and price.
Which upgrades would we spend money on?
In a high-end bathroom, low-iron glass or OptiShower OW would be high on our list. The difference is especially worthwhile when the tile and stone are central to the room.
For a household dealing with hard water, HydroClear is a practical upgrade to discuss. It helps with glass care, although it does not eliminate cleaning or change the water coming into the shower.
Hardware is more personal. Choose a finish you expect to enjoy for years. If you are undecided, a traditional finish such as polished nickel is a good place to start. A finish should work with your bathroom, not just with this year's inspiration photos.
Quoting more than one enclosure
If your project includes several bathrooms, send us the full scope together. The same applies if you also need vanity mirrors, a gym mirror wall, or other custom glass.
Reviewing everything at once lets us account for the overall project and coordinate the work. We do not apply a blanket discount percentage to every multi-enclosure job; the combination of sizes, selections, and installation requirements still matters.
Get a price for your actual shower
Send us photos, approximate dimensions, or your bathroom plans, along with any glass and hardware preferences. Those give us a useful starting point. Final measurements are taken from the finished surfaces before fabrication.
The ranges on this page are a guide to how the layouts compare, not a quote. Two showers of the same shape and size can land a thousand dollars apart once the glass and hardware are chosen, which is why we price the actual project rather than the category it falls into.
We proudly serve Maryland, Washington DC, and Northern Virginia. Contact ShowerDoorKing with your project details, and we will help you understand the enclosure, the options, and the complete installed price.


